How to Fix Traeger WiFi Issues [100% Working]

After Traeger added WiFi functionality to its grills and smokers, a short time later, users began to have connectivity problems. There’s no denying that Traeger creates excellent grills. However, when you spend $1,000 on a device, you only want it to operate; you don’t want to be reading instructions on how to connect to the WiFi. Here we will discuss how to Fix Traeger WiFi Issues without customer support [100% Working].

How to Fix Traeger WiFi Issues?

Make sure you use the most recent Traeger App and that the most recent Firmware is installed on your grill to resolve your WiFi problems. Next, restart your phone and the grill, do a factory reset on the grill, and finally, connect your grill to WiFi (2.4GHz only). It takes four hours to pair.

Step-by-step Instruction

Numerous documented complaints about the grill’s WiFi problems were made in internet forums, and Traeger eventually recognized them.

Make sure to carefully follow each step in the step-by-step solution Traeger developed, described below, and has worked for many clients.

I also advise that you carry out these instructions exactly as you read them.

Simply confirm that your phone is linked to the 2.4GHz WiFi network in your home and not the 5.0GHz network before you begin. WiFi networks operating at 5.0GHz are incompatible with Traeger barbecues.

Step 1: Restart your phone and grill.

Power cycling entails turning it off and back on to assist a gadget in recovering from an unresponsive or unwanted state.

You should power cycle your Traeger grill AND your smartphone for this procedure. Simply hold the power button down until the phone completely shuts off to restart your phone. Before turning the phone back on, wait 30 seconds.

Step 2 – Traeger App

If you haven’t done so, perform a “Traeger” search in the Google Play Store or the Apple App Store, then download the Traeger app.

Always ensure the App is running at its most recent version. There are known problems with older versions, some of which affect WiFi connectivity. All of these problems are gone in the most recent version. Update it if you see any signs you’re using an outdated version.

On Apple phones, the app’s home screen will display a little download icon to let you know a new version is available. You only need to click the app, which will automatically install.

Step 3 – Factory reset grill

Go to the Menu, followed by Settings and About Barbecue on your Traeger grill. When you arrive, you should press and hold the ignite button until the Traeger logo appears (it takes about 5-10 seconds). Your grill will begin a factory reset when you do this.

Step 4 – Grill Firmware version

Once the grill has been reset, you should check to see if your model is running the most recent firmware version. Go to Menu, Settings, and About Grill on your Traeger to view the firmware version. The most recent firmware version should be mentioned there. If not, return to the previous action and factory reset your grill until you do.

Step 5 – Pair Grill

It’s time to pair the grill now that it has been reset and is running the newest firmware. Say Yes, Accept, or Join each prompt to form a couple. The connect to WiFIRE screen will eventually appear on your app, making it appear as though you are not linked to a grill.

Don’t believe you did something wrong because this is EXPECTED and a necessary part of the process.

Step 6 – Confirm the WiFi connection and wait 4 hours.

As long as the grill is on, select Settings, then WiFi details, by pressing the Menu button. Check to see if the grill displays a connection to your home network. Allow the grill to download and apply the update fully, if it is connected, for at least 4 hours.

Step 7 – Verify the Software Version.

You can hit Menu, choose Settings, and About grill when the four hours are up. Verify that the current Software update has been applied to the grill.

If so, you’re almost finished!

Step 8: Recheck your WiFi connection

To get WiFi details, press Menu again, then choose Settings. Ensure that the WiFi network in your home is accessible from the Traeger grill. Reminder: 2.4GHz networks are the only ones that Traeger grills support. Go ahead and choose Forget Network if it is.

Step 9 – Pair Grill for the final time

Say Yes/Accept/Join each request to pair your grill. Following the naming of your grill, it ought to now be appearing in your app, and you ought to be fully linked.

Also read: LG TV Not Connecting to WiFi.


I advise starting at step 1 and going through all nine steps again if you still have WiFi issues. I realize this is inconvenient, but I’m sure those steps will fix your issue.

However, there will inevitably be those with whom you can’t connect, so here are a few other factors to consider. To begin with, check that the distance between your grill and your home router/modem (or a waypoint if you have a mesh WiFi setup) is not too great. Thirty feet/10 meters is regarded as adequate.

Sometimes the signal is simply insufficient at higher distances; if that is the case, you will never establish a connection. Ensure that the grill is pointing toward your modem or router as well.

Your home WiFi settings should be visible from where the controller is pointed. Take into account any additional barriers that can interfere with your signal. Is the signal being blocked by a wall or metal pipes? If so, you may need to purchase a WiFi extension or booster.

Also read: Samsung TV won’t connect to WiFi.


If you take the proper measures, there are several WiFi issues with Traeger grills that are relatively simple to resolve. Making sure you are using the most recent versions of the Traeger App and your grill’s Firmware is one solution suggested by Traeger. 

Next, reboot your phone and the grill, pair your grill with your 2.4GHz WiFi network, and power cycle both devices. It takes roughly 4 hours to pair.

The success of your attempt to reconnect your Traeger grill to your WiFi network is all that matters. Therefore, I sincerely hope this tutorial was helpful.

Leave a Reply

Your email address will not be published. Required fields are marked *