One AirPod Not Working? – How to Fix it?

Do not panic if one of your Apple AirPods isn’t charging. Because there are a number of easy and tried solutions for this very typical problem faced by many AirPod owners.

If one of your AirPods isn’t charging, it must be because of the charging case port and AirPod terminal which are probably dirty. You need to clean the metal contact ring present at the bottom of your AirPods and the charging port with a Q-tip dipped in isopropyl alcohol will fix this.

why is one Airpod not charging?

For the majority of individuals, cleaning the AirPods and the case is sufficient. There are four more tried-and-true solutions if cleaning the case does not work for you. Try each of these methods listed below before going to an Apple store. 

By Cleaning charging ports and the bottom of AirPods

AirPods are charged wirelessly inside the AirPods case which is why it is one of the best features that contribute to their adaptability. A two-cell battery with a 1.98 Watt-hour capacity is housed inside the case.

The two little metal charging connections on the charging port make direct contact with the metal contact ring at the base of your AirPod when you insert it into the charging case.

The charge must be transferred directly between the case and the AirPod, which calls for this direct connection. This connection must not be compromised in any way to allow for charging.

If one AirPod won’t charge, it’s probably because earwax, grit, and filth have accumulated on it and within the charging port which blocks the connection.

Use a Q-tip to carefully clean the AirPod’s bottom metal ring. After that, clean the charging port by opening your charging case. Be sure you descend all the way to the bottom.

To obtain a deep clean, you can, if necessary, apply some isopropyl alcohol to the end of the Q-tip. This method is approved by Apple. 

To get a better look, grab a torch or turn on the phone’s flash. You can probably end this problem once and for all if you make sure the connection points are spotless.

By Using Apple certified charging cables

Chargers, cables, and other costly connections are all part of Apple’s products.

The desire to buy a wireless charging dock or charging cable for your AirPods for half the price is understandable. But making sure it is Apple certified is important.

The chances that a third-party cable you purchase from Amazon or a mall retailer is subpar or even fake are very high. What you pay for is what you actually get.

The Apple support page specifically warns users to avoid using these knockoff parts because they put your safety and the safety of your Apple equipment at risk.

It’s quite likely that the reason one of your AirPods isn’t charging all the way is that you’re using a cheap charging cord.

Get the right cable by spending that extra money. If you’re unsure if this is the reason for your charging issues, ask a buddy for a genuine AirPod charger.

By Fully charging your AirPods

Use your Apple-certified charger to charge your AirPods fully. Make sure it gives a full charge for the case and the AirPods.

If charging is less than 30%, it can cause some challenges with maintaining a constant connection as your AirPods get older. Difficulties begin to multiply below 20%.

AirPods will need a 1-2 hours to fully charge (the time can vary according to the charging at the start), but it will be worthwhile.

Most individuals can fix the one AirPod not charging issue using clean AirPods, an approved charging cord and fully charging the AirPods.

There is yet hope for the rest of you.

By Resetting your AirPods

Another easy fix, but just a bit more difficult than resetting your Bluetooth. This will work for about 90% of people struggling to fix their AirPods. It will also work if you are facing Airpods Connected but no sound.

To reset, you need to “Forget This Device”. The steps to be followed are:

  1. Open Settings
  2. Go to Bluetooth
  3. Go to the info of your AirPods
  4. Click on “Forget This Device”
  5. This will successfully remove your AirPods from your phone

Now that you have removed your AirPods, the next step is to re-sync them.

To re-sync the AirPods, the steps involved are:

1. Turn ON your phone’s Bluetooth

2. Open the case and keep both the AirPods in the charging case 

3. Hold the back button of the AirPod charging case by the time a white light blinks 

4. Your AirPods will come up on your phone. Click on “Connect”

This might take some time but then your AirPods will be connected. This method will re-sync your AirPods and fix the connection problem. 

If this still doesn’t work, there is no need to panic, there are some other ways that will solve this for you.

It can take up to 3 full resets, so try accordingly.

By Updating the AirPod firmware

Apple updates the firmware of its AirPods frequently. Think of firmware as the headphone operating system.

This Firmware or operating system is updated constantly, with some updates even bringing about improvements.

The firmware for AirPods is updated automatically; unlike the iPhone, there is no button to press to upgrade. However, make sure to verify that the AirPods are on the most recent firmware. You can do this by following the steps below :

1. Access Settings

2. Go to Bluetooth

3. Open up the info of your AirPods

4. Check the version

Keep your AirPods back in the case, charge your case, and keep your iPhone close to it if you believe your AirPods are outdated. This ought to force an update.

By Replacing one AirPod

It’s time to face the terrible fact that, for a very tiny number of you, trying to fix your charging problem will require getting a new one.

There are still some people out there that just don’t have that type of luck, despite the fact that many AirPods users can repair their earbuds easily.

However, you ought to do the following before purchasing a brand-new pair of AirPods:

1. Take your AirPods to your neighborhood Apple Store so they can check your warranty.

2. You should know that there is no need to purchase the full set if only one of the AirPod is damaged.

The warranty will pay for a repair if you’ve had your AirPods for less than a year. A replacement might also be offered.

If your AirPods are not under warranty, you can purchase the damaged AirPod on the Apple website. For the basic AirPods or AirPods Pro, a single airpod costs around $40.

Although it isn’t a cheap fix it is far preferable to having to purchase a new pair of AirPods.


If one of your AirPods isn’t charging, there are various tested solutions for this very typical problem:

1. Clean your charging case and the bottoms of your AirPods.

2. Utilize charges approved by Apple to charge your AirPods.

3. Charge the AirPods and its case completely to 100%.

4. Use “Forget This Device” to reset your AirPods, then fix your headphones.

5. Update the firmware on your AirPods

6. Purchase a new AirPod to replace your damaged one.


What if one AirPod does not work even after resetting?

If one AirPod is not working even after resetting, charge both the case and the AirPods fully. Verify that each AirPod is charging by looking at the iPhone or iPad’s charge status. Insert the two AirPods into each ear. To test both AirPods, play audio. Reset your AirPods or call Apple Support if an AirPod is still not functioning.

How to fix it if AirPods are not charging in case?

Check for a stable connection. Make sure the Lightning to USB cable is securely inserted into the charging case and USB power adapter if you have AirPods or AirPods Pro. After that, confirm that the power adapter is inserted correctly into a power outlet.

What to do when one AirPod is not connecting?

If one of the AirPod is not connecting, you need to go to Settings > Access Bluetooth > Click on info next to your AirPods > Scroll and select ‘Forget this device’. Make sure your AirPods and the case is charging. Wait for 30 seconds and then re-sync your AirPods again.

Leave a Reply

Your email address will not be published. Required fields are marked *